bolt hole
英 [bəʊlt həʊl]
美 [boʊlt hoʊl]
网络 螺栓孔; 螺孔; 螺栓孔直径与形式; 栓孔
双语例句
- The bolt hole pattern and outside diameter dimensions were adopted for plastic flanges manufactured in the U.
用于美国制造的塑料法兰上所采用的螺栓孔模式和外径尺寸。 - The utility model relates to a construction tool, in particular to a reinforcing cage of the bolt hole used for reserving the equipment foundation.
本实用新型涉及一种建筑施工用工具，具体为一种设备基础预留螺栓孔洞钢筋笼。 - He used the garden shed as a bolt hole for when the children got too noisy.
孩子们过分喧闹时，他便躲在花园的棚屋里。 - Straighten stamped steel pans particularly around the bolt hole lacations.
调整印花钢盘正好在拴洞周围的位置。 - Mount restrictor bar into the restrictor bar groove of upper die, mount adjusting bolt for restrictor bar into the bolt hole in the restrictor bar, then mount lower press block, upper press block.
在上模节流棒槽内装入节流棒，将节流棒调节螺栓装配进节流棒的螺丝孔中，再装配上压块。 - Bolt Hole Spacing should be consistent with the allowable deviation of norms.
螺栓孔孔距的允许偏差应符合规范的规定。 - The foundry technology of blast furnace steel casting cooling wall has been introduced with emphasis on fabricating of pattern plate, use of inner chilling and making experiences of core of bolt hole.
介绍高炉铸钢冷却壁的铸造工艺，特别是模板的制作、内冷铁的使用以及螺栓孔芯子的制作经验。 - A bolt hole is formed in the shaft body in such a manner as to substantially perpendicularly intersect the axis of the shaft body.
螺栓孔以与所述轴体的轴线基本上垂直相交的方式形成在所述轴体中。 - A bush is fitted into the bolt hole in such a manner as to prevent the bolt hole from establishing communication between the plurality of oil passages.
衬套以防止螺栓孔在数个油道之间形成连通的方式安装到所述螺栓孔中。 - As a general rule, piping flanges should be concentric to pump nozzles to within the flange bolt hole clearance tolerance.
管路法兰与泵口要同心，偏差不能超过法兰螺栓孔尺寸公差。 - It is concluded that, the residual stress induced by cold expansion can maintain enough strength to prevent and retard fatigue crack initiation and growth in rail bolt hole.
结果表明，冷扩张过程所引入的切向残余压应力能保持足够的强度，以对钢轨螺栓孔起到显著的防裂和止裂作用。 - PC sleeper's longitudinal crack from bolt hole, a serious kind of the sleeper's damage in China, is a main cause which badly shortens the sleeper's life.
预应力混凝土轨枕螺栓孔纵裂伤损是我国轨枕伤损中较为严重的一种，是近十年来影响轨枕寿命的主要因素之一。 - Based on the residual stress distribution law around the rail bolt hole induced by cold expansion and the local strain analysis, a model which considered the relaxation of residual stress during cycling was built to predict the crack initiation.
建立了基于钢轨螺栓孔残余应力分布规律和局部应变，并考虑残余应力衰减的疲劳裂纹萌生寿命预测模型。 - Application of Sleeve Insertion Method in Repairing Main Bearing Bolt Hole of Engine Cylinder Block
镶套法在发动机缸体主轴承螺栓孔修复中的应用 - Magnetic leakage quantitative detection of crack in bolt hole
基于漏磁检测的螺栓孔裂纹定量检测方法 - The technology for boring-reaming the bolt hole of pin connecting original main shaft with new runner of turbine in site of Danjiangkou hydropower plant and its effect are described.
介绍了丹江口电厂在机组改造增容中新转轮与原大轴连接销钉螺栓孔工地同镗铰所采用的方法及达到的效果。 - Cause and Preventive Measures of Longitudinal Crack from Bolt Hole of the Sleeper
轨枕预留螺栓孔纵裂原因及改进措施 - In order to solve the alignment problem of steel girder and deck slab bolt hole, the screw jack is designed.
为了解决钢结构公路大桥施工中钢梁与桥面板拼装螺栓孔的对正问题，特别设计了一种机械传动的螺旋千斤顶。 - Environmental analysis on pneumatic bolt hole drill
气动式锚杆钻机的环保性分析 - Contact problems between concrete base surface and column base, bolt nut and neighborhood plate, bolt shank and bolt hole are simulated really.
有限元分析中模拟了底板与基础面之间、锚栓垫片与底板之间、以及锚栓与混凝土之间的接触作用。 - Based on the three-dimensional model, the effects of bolt-hole clearance and friction coefficient on the stress field around the bolt hole in the bolt-loaded laminate has been studied.
基于螺栓连接三维实体模型，研究螺栓&孔间隙、挤压面摩擦因数等因素对挤压面上的应力分布的影响。 - The method of Magnetic Flux Leakage ( MFL) for crack in bolt hole is introduced. A new method of pulse magnetization for the workpiece was advanced to enhance the signal.
介绍了飞机机翼大梁螺栓孔漏磁检测方法，提出对工件进行脉冲式磁化，增强漏磁检测信号； - The Heat Transfer Model between Bolt and Bolt Hole of Bolted Flange Sealing
法兰密封中螺栓与螺栓孔的传热学模型建立 - The main half ductile breakages of the specimen are the enlargement of the bolt hole in the joint.
主要的半延性破坏为上弦节点连接处螺栓孔的扩大。 - By comparing with the experimental results, a detailed discussion on the influence of cold expansion on the fatigue performance of rail bolt hole was presented.
结合实验探讨了冷扩张过程对钢轨螺栓孔疲劳寿命的影响方式和效果。 - Elastoplastic Mechanics Analysis and Computer Simulation for Rail Bolt Hole Cold Expanding Process
钢轨螺栓孔冷扩张过程弹塑性分析及其模拟计算 - Effect of Cold Expansion on the Fatigue Performance of Rail Bolt Hole
钢轨螺栓孔冷扩张对疲劳寿命的影响 - It is found that the thickness of the base plate has a great effect on the shear capacity of the anchor bolt connections, while the effects of the difference between the diameters of the bolt hole at the base plate and bolt is not significant.
研究发现柱脚底板厚度对抗剪承载力的影响很大，底板锚栓孔径和锚栓直径之差对抗剪承载力的影响很小。 - The results showed: the stress near the bolt hole of cylinder head concentrate seriously because of the bolt preload effect; the stress near cylinder head fire surface nozzle and valve port is higher because of the high temperature and pressure influenced by the gas-fired.
分析结果表明，气缸盖螺栓孔由于螺栓预紧力影响，附近应力集中比较严重；受燃气高温高压影响较大的缸盖火力面喷油嘴和气阀口附近应力较高。 - The improvable scheme reduces the stress and train amplitude on bolt hole after calculation, and than enhances the rigidity of the chassis. The results show that the scheme is reasonable.
经过分析计算表明，改造的方案适当减少了螺栓安装孔处的应力集中，减少了应变幅值，加强了底架的刚度，说明改造还是比较合理的。